Wheels

Zipp's 303 Firecrest Tubeless wheels are designed for the real world—a world of imperfect conditions, varying road surfaces, and elements where the bottom line is simple: efficiency = speed. They're faster, lighter, and more capable over varied terrain—whether the surface is pavement in all its conditions or no pavement at all. Deeply rooted in Zipp's drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced wind resistance, rolling resistance, rider fatigue, and weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 32mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tire, boosting aero efficiency on the road. The wide rim stance also features less tire deflection for reduced rolling resistance. The combination of the wider tire, increased tire volume, and lower tire pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions—the tire and wheel system absorbs the shaking, not the rider. At the center of the 303 Firecrest Tubeless is a versatile and durable new hubset, the German-engineered ZR1 DB. This hubset features 66 points of engagement for quicker response. The 303 Firecrest Tubeless wheels are for dedicated cyclists who aspire to the latest in technology. They're for those who compete in races, against peers, or simply to conquer personal limits. - New Zipp graphics and cosmetic identity that scream speed - Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile - Lighter weight than its predecessor, making it nimble and fast - Tubeless Made Easy, optimized tire bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tire. - Ultra-wide 25mm rim profile creates a better tire interface to be fast on or off the road - 40mm rim depth makes a light and aero wheel in every situation - Ships with 12mm end caps - Center Lock rotor interface (lockring included)

Zipp's 303 Firecrest Tubeless wheels are designed for the real world—a world of imperfect conditions, varying road surfaces, and elements where the bottom line is simple: efficiency = speed. They're faster, lighter, and more capable over varied terrain—whether the surface is pavement in all its conditions or no pavement at all. Deeply rooted in Zipp's drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced wind resistance, rolling resistance, rider fatigue, and weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 32mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tire, boosting aero efficiency on the road. The wide rim stance also features less tire deflection for reduced rolling resistance. The combination of the wider tire, increased tire volume, and lower tire pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions—the tire and wheel system absorbs the shaking, not the rider. The 303 Firecrest Tubeless wheels are for dedicated cyclists who aspire to the latest in technology. They're for those who compete in races, against peers, or simply to conquer personal limits. - New Zipp graphics and cosmetic identity that scream speed - Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile - Lighter weight than its predecessor, making it nimble and fast - Tubeless Made Easy, optimized tire bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tire. - Ultra-wide 25mm rim profile creates a better tire interface to be fast on or off the road - 40mm rim depth makes a light and aero wheel in every situation - Ships with 12mm end caps - Center Lock rotor interface (lockring included)

Feel your bike come alive on the open road with the new Alpinist CL II, featuring the lightest, best-handling clincher rims we have ever made, elevated with the performance of a tubeless system. The brand new Alpinist CL II now brings mountain-taming performance slightly closer to earth with a carefully selected build designed to let riders take full advantage of the low rim and spoke mass. The Alpinist CL II utilizes the same rim as the alpinist clx ii. They react to even the slightest increase in power with immediate acceleration and carve the purest lines in the corners, yet they can also handle almost double the impact standards of every certifying body. The result is a 1375-gram tubeless wheelset with an otherworldly ride quality designed for real-world road pressures. The Alpinist CL II utilizes components curated to keep you rolling and rolling fast. The DT Swiss 350 hubs, featuring their star ratchet drive system, are reliable and easy to service, while 24 DT Swiss comprace straight-pull spokes front and rear, laced to the rims with their alloy pro lock nipples, are synonymous with reliability and can be obtained at any bike shop. The reduced rolling resistance of a tubeless setup is undeniable, as are the benefits of improved handling and incredible puncture protection. It took the most extensive and demanding engineering and testing program we've ever undertaken. As a result of this extensive development, the Alpinist CL II features a hooked rim that can handle a huge range of pressures up to 110psi and offers an easier set up and mounting experience than ever. - Rim: Alpinist CLX Carbon Clincher, 700c, Disc Brake, Tubeless - Rim Details: 33mm Depth, 27mm External Width, 21mm Internal Width - Hub: DT Swiss 350 Straightpull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: DT Swiss Competition Race Straightpull, Front: Radial/Two-cross (2:1) 21 count, DS: 276mm, NDS: 290mm; Rear: Two-cross (1:1) 24 count, DS: 283mm NDS: 287mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 24mm—38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi) - Weight: Wheelset 1,375g, Front 606g, Rear 769g (including 15g, tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

Feel your bike come alive on the open road with the new Alpinist CL II, featuring the lightest, best-handling clincher rims we have ever made, elevated with the performance of a tubeless system. The brand new Alpinist CL II now brings mountain-taming performance slightly closer to earth with a carefully selected build designed to let riders take full advantage of the low rim and spoke mass. The Alpinist CL II utilizes the same rim as the alpinist clx ii. They react to even the slightest increase in power with immediate acceleration and carve the purest lines in the corners, yet they can also handle almost double the impact standards of every certifying body. The result is a 1375-gram tubeless wheelset with an otherworldly ride quality designed for real-world road pressures. The Alpinist CL II utilizes components curated to keep you rolling and rolling fast. The DT Swiss 350 hubs, featuring their star ratchet drive system, are reliable and easy to service, while 24 DT Swiss comprace straight-pull spokes front and rear, laced to the rims with their alloy pro lock nipples, are synonymous with reliability and can be obtained at any bike shop. The reduced rolling resistance of a tubeless setup is undeniable, as are the benefits of improved handling and incredible puncture protection. It took the most extensive and demanding engineering and testing program we've ever undertaken. As a result of this extensive development, the Alpinist CL II features a hooked rim that can handle a huge range of pressures up to 110psi and offers an easier set up and mounting experience than ever. - Rim: Alpinist CLX Carbon Clincher, 700c, Disc Brake, Tubeless - Rim Details: 33mm Depth, 27mm External Width, 21mm Internal Width - Hub: DT Swiss 350 Straightpull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: DT Swiss Competition Race Straightpull, Front: Radial/Two-cross (2:1) 21 count, DS: 276mm, NDS: 290mm; Rear: Two-cross (1:1) 24 count, DS: 283mm NDS: 287mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 24mm—38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi) - Weight: Wheelset 1,375g, Front 606g, Rear 769g (including 15g, tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

Elevating Weekend Hot Laps to World Cup XC Status From weekend hot laps to World Cup XC finals, the Control Carbon combines the low weight and strength found in our world-beating Control SL rim with the new DT Swiss 350 hubs. An unmatched level of durability, precision, and performance in this new Carbon Control wheelset that is purpose-built to open terrain, from gut-wrenching climbs to tear-inducing descents – a whole new era of riding. A high-performance wheel that excels everywhere from world cup xc races to your favorite weekend trail. The Control Carbon combines the low weight and strength found in our world-beating Control SL rim with the new DT Swiss 350 hubs and spokes. This level of quality, precision and performance has previously been found only on wheels costing twice as much. - Rim: Control SL 29, 29mm Internal Width, Zero Bead Hook 4mm FlatTop Design, Tubeless Compatible, Compatible with Tire Inserts - Spoke Pattern: 28-Hole Two-cross (1:1) Non Driveside Front and 28-Hole Two-cross (1:1) Rear - Spoke Type: DT Competition Race Straighpull—Front Driveside 301mm, Non-Driveside 300mm , Rear Driveside 298mm, Non-Driveside 301mm - Nipple Type: DT Swiss Hexagonal Prolock Alloy - Hub: DT Swiss 350 Straight-pull, 6-bolt, 36t Star Ratchet System, 110x15mm & 148x12mm thru-axle compatible - Weight: Set—1450g w/ Tubeless Rim Tape - Assembly Method: Hand-built - Extras: 19 and 31mm OD end cap options included, Roval Spoke Kit, Tubeless Rim Tape and Valves, Lifetime warranty - System Weight Limit: 275lbs/125kg

Fastest XC Wheels In the Real World 1240 grams is an obscenely light weight when talking about mountain bike wheelsets, the kind of weight that XC racers dream about. But light weight alone is no longer enough. So, we engineered the new Control SL wheels to be sharp handling, smooth riding, extra durable, and 22% less likely to pinch-flat your tires, in addition to being some of the lightest weight production wheels on the planet. - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook 4mm FlatTop design. Compatible with tire inserts. - Rim Width: 29mm internal - Front Hub: Alloy body, 15mmx110 thru-axle, 19 and 31mm OD end cap options included. Max Rotor Size <200mm - Front Spoke Pattern: DT Swiss Aerolite Straightpull 294mm, 24-hole, Two-cross - Rear Hub: CNC-machined alloy body, SiNC Ceramic Bearings, premium-quality DT 180 internals and 36t quick engagement ratchet system cassette, includes SRAM XD Driver and 148 end caps. Max Rotor Size <200mm - Rear Spoke Pattern:DT Swiss Aerolite Straightpull 294mm, 24-hole, Two-cross - Bearing Type: SiNC Ceramic Sealed cartridge - Nipple Type: DT Swiss Pro Lock Hexagonal Alloy 14mm 2.0mm - Total Wheelset Weight: 1240g - System Weight Limit: 275lbs/125kg

Since 2020, Rapide CLX wheels have won more races on the world tour than any other wheels, and we just made them faster. Meet the new Rapide CLX II. Combining the aerodynamics of a deep-section TT wheel with the light weight of a shallower climbing wheel and mixing in the superior efficiency and sublime handling of a tubeless system-the Rapide CLX II delivers maximum speed for real-world riding. We developed distinctly different shapes for the Rapide CLX II front and rear rims. The result is a wheelset that catches less drag than most 65mm wheelsets and brings a dramatic 25% improvement in stability over 50mm rims in wind gusts. The Rapide CLX II utilizes a hooked rim (allowing for real-world riding pressures up to 110psi, if that's your thing) for secure tire bead retention and an easier set up and mounting experience than ever before. All in a wheel that almost doubles current industry impact standards while managing to achieve the lightest weight possible. Our aeroflange hubs are aerodynamically optimized, with wide bracing angles for increased strength and reduced spoke weight. They also benefit from the reduced weight and increased strength of ceramic sinc bearings and the legendary durability of DT Swiss exp freehub internals. - Rim: Rapide CLX Carbon Clincher, 700c, Disc Brake, Tubeless Rim Details: 51mm Depth, 35mm External Width, 21mm Internal Width - Hub: Roval Aero Hub (AFD01/AFD02R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub - Bearing Type: DT Swiss SINC Ceramic Bearings - Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 18 count, DS: 257mm, NDS: 252mm; Rear: One-cross/Two-cross (2:1) 24 count, DS: 243mm NDS: 249mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 24mm—38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi) - Weight: Wheelset 1,520g, Front 710g, Rear 810g (including 15g, tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

Taking the notion of combining flagship performance with workhorse dependability one step further, we're introducing the Terra C. This shares the same hub and spoke architecture as the Terra CL, ensuring ease of service and spoke replacement, should the need arise and is paired with an entirely new rim layup. The rims on the Terra C share the same dimensions and broad range of tire mounting possibilities as the Terra CLX and CL—33mm deep with a 25mm internal width—but are crafted using a new-to-us process known as Resin Transfer Molding. This is an automated process that allows us to very precisely control how resin is introduced to the layup, which in turn ensures maximum strength and material performance. The end result is an incredibly tough set of wheels that you can beat on to hell and back. - Rim: Terra C RTM Carbon Clincher, 700c, Disc Brake, Tubeless Compatible - Rim Details: 32mm Depth, 30mm External Width, 25mm Internal Width; ERD 577mm - Hub: DT Swiss 370 J-bend Center Lock, Ratchet LN 18t internals (20 degs), 100x12mm & 142x12mm, Shim. Rd. 11sp Freehub (Convertible freehub ) - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: DT Swiss Competition Race J-bend, Front: Radial/Two-cross 24 count, R: 268mm, L: 279mm; Rear: Two-cross 24 count, DS: 277mm NDS: 278mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 28mm - 47mm; Max Pressure: 28c-32c: 80psi, 33c – 36c: 65psi, 37c- 47c: 60psi - Weight: Wheelset 1,610g, Front 719g, Rear 891g (including tubeless rim tape and tubeless valve) - Assembly Method: Carbon Layup - Automated, Wheel Build - Hand built. - Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit - System Weight Limit: 275lbs / 125kg

Designed to handle everything from backcountry rock gardens to heavy days at the bike park, the Traverse is the definitive all-mountain wheel. A super-light, super-tough alloy rim is combined with refined and ultra-dependable hub and spoke technology for a wheel that can conquer any mountain. - Rim Type: Traverse Alloy, 29, Disc Brake, Tubeless Ready, Zero Bead Hook Design - Rim Details: 22mm Depth, 34mm External Width, 30mm Internal Width - Hub: Roval Step Flange Hub (SP19151/JFM02R) 6-Bolt, DT Swiss Ratchet LN 18t (20 deg), 110x15mm & 148x12mm thru-axle, SRAM XD Freebub, (Convertible freehub and endcaps) - Bearing Type: Sealed Steel Cartridge Bearing - Spokes: DT Swiss Competition Race J-Bend, Front: Two-Cross 28 count, L: DS 283mm, R: 283mm; Rear: Two-cross 28 count, L: DS 283mm NDS 283mm - Nipple: DT Swiss Hex Prolock Brass 2.0x14mm - Tire Size: 1.95" – 3.0"; Max Pressure: 40 psi - Weight: Wheelset 1,870g (including tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; to the last nipple turn - Extras: 19 and 31mm OD end cap options included, Roval tubeless tape and tubeless valve, Spare Spoke and Nipple Kit - System Weight Limit: 240lbs / 109kg

The entry into the world of gravel riding, the G 1800. If you want to give cycling a try and plan to do your first rides off-road the G 1800 is your choice of wheel. Combining all the key advantages of DT's gravel segment wheels at a very attractive price point, these wheels may be your entry into the world of gravel riding. Leave for beaten roads and turn to the unexplored paths, the G 1800 will join you. - 370 based hub

The entry into the world of gravel riding, the G 1800. If you want to give cycling a try and plan to do your first rides off-road the G 1800 is your choice of wheel. Combining all the key advantages of DT's gravel segment wheels at a very attractive price point, these wheels may be your entry into the world of gravel riding. Leave for beaten roads and turn to the unexplored paths, the G 1800 will join you. - 370 based hub

Take to the open road with the lightest, most durable, best-handling alloy wheel Roval has ever made - the Alpinist SLX. This is the pinnacle of alloy - a wheel so good it earned the Alpinist name. There’s no room for excess weight whether you’re chasing summits or looking for ride quality. For the climbers, the wheels are stiff enough for high-powered efforts and feature confident handling. The newly engineered shot peen treatment increases fatigue life and with proven DT Swiss 350 hubs and Sapim spokes, the overall weight has been reduced by 30 grams. Because every gram counts. LIGHTWEIGHT X RIDE QUALITY: As the first-ever alloy product to earn the Alpinist name, the Roval Alpinist SLX wheels weigh in at 1,485 grams* thanks to premium alloy and a thoughtful build. Confirming what we’ve all felt: lightweight wheels feel better to ride. *1,485 grams production sample weight. Final weights may vary slightly. TUBELESS COMPATIBLE: There’s no room for excess weight whether you’re chasing summits or looking for ride quality. A Shallow rim depth amplified by tubeless compatibility means you’ll get sublime ride quality with the added efficiency, comfort, and flat protection of tubeless tires. RELIABLE PERFORMANCE: Featuring confident handling for high-powered efforts, the newly engineered shot peen treatment increases fatigue life, while the proven DT Swiss 350 hubs and Sapim spokes enhance overall durability and performance. - Rim: Alpinist Alloy, 6061 Alloy Shot-Pened, 700c, Disc Brake, Tubeless Compatible - Rim Details: 24mm Depth, 23.5mm External Width, 20mm Internal Width - Hub: DT Swiss 350 Straighpull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub (Convertible freehub) - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: Sapim D-Light Straightpull, Front: Radial/Two-cross (2:1) 21 count, DS: 296mm, NDS: 292mm, Rear: Two-cross (1:1) 24 count, DS: 291mm NDS: 295mm - Nipple: Sapim Secure Lock Double Square Alloy Blk, 2.0 x 18mm, 16cNm - Max Pressure: 130psi - Weight: Wheelset 1,485g, Front 694g, Rear 791g (excluding 15g, tubeless rim tape, and tubeless valve) - Assembly Method: Hand-built - Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit, Lifetime Warranty, System Weight Limit: 275lbs / 125kg

Take to the open road with the lightest, most durable, best-handling alloy wheel Roval has ever made - the Alpinist SLX. This is the pinnacle of alloy - a wheel so good it earned the Alpinist name. There’s no room for excess weight whether you’re chasing summits or looking for ride quality. For the climbers, the wheels are stiff enough for high-powered efforts and feature confident handling. The newly engineered shot peen treatment increases fatigue life and with proven DT Swiss 350 hubs and Sapim spokes, the overall weight has been reduced by 30 grams. Because every gram counts. LIGHTWEIGHT X RIDE QUALITY: As the first-ever alloy product to earn the Alpinist name, the Roval Alpinist SLX wheels weigh in at 1,485 grams* thanks to premium alloy and a thoughtful build. Confirming what we’ve all felt: lightweight wheels feel better to ride. *1,485 grams production sample weight. Final weights may vary slightly. TUBELESS COMPATIBLE: There’s no room for excess weight whether you’re chasing summits or looking for ride quality. A Shallow rim depth amplified by tubeless compatibility means you’ll get sublime ride quality with the added efficiency, comfort, and flat protection of tubeless tires. RELIABLE PERFORMANCE: Featuring confident handling for high-powered efforts, the newly engineered shot peen treatment increases fatigue life, while the proven DT Swiss 350 hubs and Sapim spokes enhance overall durability and performance. - Rim: Alpinist Alloy, 6061 Alloy Shot-Pened, 700c, Disc Brake, Tubeless Compatible - Rim Details: 24mm Depth, 23.5mm External Width, 20mm Internal Width - Hub: DT Swiss 350 Straighpull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub (Convertible freehub) - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: Sapim D-Light Straightpull, Front: Radial/Two-cross (2:1) 21 count, DS: 296mm, NDS: 292mm, Rear: Two-cross (1:1) 24 count, DS: 291mm NDS: 295mm - Nipple: Sapim Secure Lock Double Square Alloy Blk, 2.0 x 18mm, 16cNm - Max Pressure: 130psi - Weight: Wheelset 1,485g, Front 694g, Rear 791g (excluding 15g, tubeless rim tape, and tubeless valve) - Assembly Method: Hand-built - Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit, Lifetime Warranty, System Weight Limit: 275lbs / 125kg

Born on the World Cup, destined for your local trails. We poured World Championship-winning engineering into developing an all-new alloy for these Control wheels. To increase the new material's durability, we customized our shot peening process—where metal projectiles are shot at the alloy to increase its strength—meeting the precise demands of our XC riders. If that wasn't enough, to eliminate creaking and reduce weight, individually customized sleeves are chosen to bond every single rim. The result is a wildly over-engineered, trail-ripping, best-of-the-best, aluminum wheel; held to the same standards as our highest-end Control SL carbon components. Whether you are looking for a solid set of training wheels that will handle it all or a big upgrade from entry-level wheels, Roval Control Alloy is the go-to wheel. With creak-free hoop construction that's laced to high-performance and proven DT Swiss hubs, you can tap into a wheelset born from World Cup technology that's ready for all riders. - Rim: Control Alloy Asymmetric, 6013 Alloy Shot-Pened, 29", Disc Brake, Zero Bead Hook Design, Tubeless Compatible, Compatible with Tire Inserts - Rim Details: 19mm Depth, 31mm External Width, 27mm Internal Width - Hub: DT Swiss 350 Straight-pull 6-bolt, Star Ratchet 36t internals (10 degs), 110x15mm & 148x12mm, Sram XD Freehub (Convertible freehub ) - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: Sapim D-Light Straightpull, Front: Two-cross (1:1) 28 count, R: 304mm, L: 304mm - Rear: Two-cross (1:1) 28 count, DS: 304mm NDS: 304mm - Nipple: Sapim Secure Lock Double Square Alloy Blk, 2.0 x 18mm, 16cNm - Tire Size: 1.9" - 2.6" - Max Pressure: 1.9"-2.3": 40psi, 2.35"-2.5": 35psi, 2.51" -2.6": 30psi - Weight: Wheelset 1,648g, Front 768g, Rear 880g (excluding 15g, tubeless rim tape, and tubeless valve) - Assembly Method: Hand-built - Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit, 19 and 31mm OD Endcaps, Lifetime Warranty System Weight Limit: 275lbs / 125kg

Fastest XC Wheels In the Real World 1240 grams is an obscenely light weight when talking about mountain bike wheelsets, the kind of weight that XC racers dream about. But light weight alone is no longer enough. So, we engineered the new Control SL wheels to be sharp handling, smooth riding, extra durable, and 22% less likely to pinch-flat your tires, in addition to being some of the lightest weight production wheels on the planet. - Bearing Type: SiNC Ceramic Sealed cartridge - System Weight Limit: 275lbs / 125kg - Total Wheelset Weight: 1240g

From the purist gravel racer to the mixed-surface fanatic, Terra CLX II provides a level of weight savings and material confidence that’s unheard of in the all-road or gravel space. This tier of weight-savings translates to rocket-like acceleration off the starting line, nimble performance in the hills, and unleashed efficiency on those loaded-down long-haul excursions. Weighing in at just 1250 grams, the Roval Terra CLX II are the lightest wheels in their class, rivaling pure climbing wheels in terms of weight and out-performing in raw toughness. We were able to get even lighter than before (50 grams lighter) by utilizing Low Flange Disc (LFD) hubs, borrowed from the Alpinist CLX II wheels. What’s being carried forward from the previous generation, is the rim. With its multiple Unbound victories, we we kept what was already class leading, and extended our lead. Because Terra CLX II is a hooked rim, you’re able to ride almost any tire and pressure. Thanks to the 25mm internal width, they work seamlessly with 28-47c tires (up to 80 PSI), giving you options to customize your setup for what’s ahead. Using Roval LFD hubs, still spinning on DT Swiss 180 hub internals, Terra CLX II continues to provide flawless ride quality. The CINC ceramic bearings inside do some serious heavy lifting when it comes to the efficiency of these wheels. Even with laundry list of demands that need to be met for the serious gravel racer, to the all-road explorer—the Roval Terra CLX II checks every box with authority. - Rim: Terra CLX Carbon Clincher, 700c, Disc Brake, Tubeless Compatible - Rim Details: 32mm Depth, 30mm External Width, 25mm Internal Width - ERD 577mm - Hub: Roval Light Hub (LF13/LF14R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub - Bearing Type: DT Swiss SINC Ceramic Bearings - Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 21 count, DS: 278mm, NDS: 290mm, Rear: One-cross/Two-cross (2:1), DS: 290mm NDS: 288mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 28mm - 47mm - Max Pressure: 28c-32c: 80psi, 33c – 36c: 65psi, 37c- 47c: 60psi - Weight: Wheelset 1,250g, Front 570g, Rear 680g (excludes 15g, tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step, from rim layup to the last nipple turn. - Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

Feel your bike come alive on the open road with the new Alpinist CLX II-the lightest, best-handling clincher wheels we have ever made. Hyper-responsive acceleration, magic in the corners, sublime over rough roads, all elevated with the performance of a tubeless system. There's no room for a single excess gram whether you're chasing summits or ride quality because perfection is only achieved when there is nothing left to take away. It takes more than a lightweight rim to deliver the incredible reactivity and handling of the tubeless Alpinist CLX II. The wheelset is designed as a system with our engineers controlling and testing every part of that system-hubs, rims, spokes, lacing-and developing it hand-in-hand with Specialized Tubeless tires. The result is a 1250-gram tubeless wheelset with otherworldly ride quality. The Alpinist CLX II utilizes a hooked rim (allowing for real-world riding pressures up to 110psi, if that's your thing) for secure tire bead retention and an easier set up and mounting experience than ever before. All in a wheel that almost doubles current industry impact standards while managing to achieve the lightest weight possible. Our all-new LightAF hubs are the spinning heart of the Alpinist CLX II. We carved 50 grams out of the previous Alpinist CLX hub with new low-profile hub bodies and machined rotor mounts. Inside, DT Swiss EXP internals and SINC ceramic bearings deliver silky-smooth efficiency and outstanding durability. - Rim: Alpinist CLX Carbon Clincher, 700c, Disc Brake, Tubeless - Rim Details: 33mm Depth, 27mm External Width, 21mm Internal Width - Hub: Roval Light Hub (LFD13/LF14R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub - Bearing Type: DT Swiss SINC Ceramic Bearings - Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 21 count, DS: 276mm, NDS: 290mm; Rear: One-cross/Two-cross (2:1), DS: 288mm NDS: 286mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 24mm - 38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi) - Weight: Wheelset 1,265g, Front 670g, Rear 694g (including 15g, tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

Feel your bike come alive on the open road with the new Alpinist CLX II-the lightest, best-handling clincher wheels we have ever made. Hyper-responsive acceleration, magic in the corners, sublime over rough roads, all elevated with the performance of a tubeless system. There's no room for a single excess gram whether you're chasing summits or ride quality because perfection is only achieved when there is nothing left to take away. It takes more than a lightweight rim to deliver the incredible reactivity and handling of the tubeless Alpinist CLX II. The wheelset is designed as a system with our engineers controlling and testing every part of that system-hubs, rims, spokes, lacing-and developing it hand-in-hand with Specialized Tubeless tires. The result is a 1250-gram tubeless wheelset with otherworldly ride quality. The Alpinist CLX II utilizes a hooked rim (allowing for real-world riding pressures up to 110psi, if that's your thing) for secure tire bead retention and an easier set up and mounting experience than ever before. All in a wheel that almost doubles current industry impact standards while managing to achieve the lightest weight possible. Our all-new LightAF hubs are the spinning heart of the Alpinist CLX II. We carved 50 grams out of the previous Alpinist CLX hub with new low-profile hub bodies and machined rotor mounts. Inside, DT Swiss EXP internals and SINC ceramic bearings deliver silky-smooth efficiency and outstanding durability. - Rim: Alpinist CLX Carbon Clincher, 700c, Disc Brake, Tubeless - Rim Details: 33mm Depth, 27mm External Width, 21mm Internal Width - Hub: Roval Light Hub (LFD13/LF14R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub - Bearing Type: DT Swiss SINC Ceramic Bearings - Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 21 count, DS: 276mm, NDS: 290mm; Rear: One-cross/Two-cross (2:1), DS: 288mm NDS: 286mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 24mm - 38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi) - Weight: Wheelset 1,265g, Front 670g, Rear 694g (including 15g, tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

Slice through the wind on Roval's Rapide CLX 40 Wheelset. They feature 40mm-tall aero carbon rims, and DT Swiss Revolution straight-pull spokes laced to sealed ceramic cartridge bearings Roval hubs. The rear hub is adorned with DT Swiss's renowned 240 star ratchet internals. The wide, carbon rim provides a round tire profile and greater lateral stiffness for precise handling. This feathery, 1240-gram wheelset spins up with ease so you can bolt out of corners and breeze up the climbs. With your favorite tubular tires, these wheels roll as smooth as silk.

Performance Upgrade Made Easy The C38 brings carbon fiber high performance to the real world. It's a versatile all-rounder equally at home crushing gravel washboards and summiting alpine passes. Optimized for use with modern wide tires, providing the right amount of sidewall support to facilitate surefooted handling in all conditions, the C38 wheelset is a great handling, lively climbing, robust all-road performer that also aerodynamically outperforms many deeper, aero-specific rims that cost twice as much. Carbon wheels are a true performance upgrade to any bike, but too often the price tag puts them out of reach. The Rapide C38 shatters that barrier and brings a class-leading Roval carbon rim and DT Swiss reliability together to provide riders with the best performance carbon wheel per dollar.

The all-new Rapide CL II wheelset brings the Rapide CLX II’s speed, efficiency, incredible handling, and stability in any conditions to more riders. Built on the exact same rims as the Rapide CLX II to elevate all this performance with tubeless-done-right technology, the Rapide CL II makes that performance easier to catch at check-out and you almost impossible to catch on the open road. - Tire Size: 24mm - 38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm – 38mm: Tubeless (60psi) Tubed (60psi) - Weight: Wheelset 1,590g, Front 725g, Rear 865g (including 15g, tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - System Weight Limit: 275lbs /125kg.

The all-new Rapide CL II wheelset brings the Rapide CLX II’s speed, efficiency, incredible handling, and stability in any conditions to more riders. Built on the exact same rims as the Rapide CLX II to elevate all this performance with tubeless-done-right technology, the Rapide CL II makes that performance easier to catch at check-out and you almost impossible to catch on the open road. - Tire Size: 24mm - 38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm – 38mm: Tubeless (60psi) Tubed (60psi). - Weight: Rear 865g (including 15g, tubeless rim tape and tubeless valve). - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - System Weight Limit: 275lbs / 125kg

Since 2020, Rapide CLX wheels have won more races on the world tour than any other wheels, and we just made them faster. Meet the new Rapide CLX II. Combining the aerodynamics of a deep-section TT wheel with the light weight of a shallower climbing wheel and mixing in the superior efficiency and sublime handling of a tubeless system-the Rapide CLX II delivers maximum speed for real-world riding. We developed distinctly different shapes for the Rapide CLX II front and rear rims. The result is a wheelset that catches less drag than most 65mm wheelsets and brings a dramatic 25% improvement in stability over 50mm rims in wind gusts. The Rapide CLX II utilizes a hooked rim (allowing for real-world riding pressures up to 110psi, if that's your thing) for secure tire bead retention and an easier set up and mounting experience than ever before. All in a wheel that almost doubles current industry impact standards while managing to achieve the lightest weight possible. Our aeroflange hubs are aerodynamically optimized, with wide bracing angles for increased strength and reduced spoke weight. They also benefit from the reduced weight and increased strength of ceramic sinc bearings and the legendary durability of DT Swiss exp freehub internals. - Rim: Rapide CLX Carbon Clincher, 700c, Disc Brake, Tubeless Rim Details: 51mm Depth, 35mm External Width, 21mm Internal Width - Hub: Roval Aero Hub (AFD01/AFD02R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub - Bearing Type: DT Swiss SINC Ceramic Bearings - Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 18 count, DS: 257mm, NDS: 252mm; Rear: One-cross/Two-cross (2:1) 24 count, DS: 243mm NDS: 249mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 24mm—38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi) - Weight: Wheelset 1,520g, Front 710g, Rear 810g (including 15g, tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

Following directly in the tire tracks of the Terra CLX, the new Terra CL utilizes the same super-light, incredibly tough rim as our flagship wheel. It's a hook-bead, 33mm deep carbon fiber rim with a 25mm inner width that plays well with tubeless setup and allows you to mount tires anywhere from 28mm to 47mm wide at whatever pressure you feel like running. In a nod to accessibility, durability and real-world serviceability, we opted to use ultra-dependable DT Swiss 350 hubs and lace them to the rims with DT Swiss Competition Straightpull spokes. The net effect of these changes is a wheelset that is almost as light as our incredibly light Terra CLX, offering close to the same benchmark performance but with more easily sourced spokes in the event of some back-of-beyond carnage, all with a price tag that is about half that of our flagship product. - Rim: Terra CLX Carbon Clincher, 700c, Disc Brake, Tubeless Compatible - Rim Details: 32mm Depth, 30mm External Width, 25mm Internal Width; ERD 577mm - Hub: DT Swiss 350 Straight-pull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. Rd. 11sp Freehub (Convertible freehub ) - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: DT Swiss Competition Race Straightpull, Front: Two-cross (1:1) 24 count, R: 287mm, L: 286mm; Rear: Two-cross (1:1) 24 count, DS: 284mm NDS: 287mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 28mm - 47mm; Max Pressure: 28c-32c: 80psi, 33c – 36c: 65psi, 37c- 47c: 60psi - Weight: Wheelset 1,408g, Front 654g, Rear 754g (including tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit - System Weight Limit: 275lbs / 125kg

Where in the world can you ride these brutes? Anywhere you damn well please. Road light, off-road tough, smooth as butter, Terra CLX EVO wheels bring leading-edge performance to the diverse needs of aggressive gravel rides. Available in 700c and 650B with 30mm internal-width rims to deliver optimal handling with up to 2.1-inch tires, so you’re the master of any terrain. Durability delivered through unsurpassed toughness-to-weight, thanks to leading composite technology rims. Lifetime warranty and no-fault crash replacement. - Rim Type: Carbon Clincher, tubeless-first - Rim Material: Advanced Carbon Composite - Rim Width (internal): 30mm - Rim Depth: 25.3mm - Front Spoke Pattern: Radial/Two-cross (2:1) - Rear Spoke Pattern: One-cross/Two-cross (2:1) - Spoke Count: Front/Rear: 24/24 - Spoke Type: DT Swiss Aerolite T-head - Nipple Type: DT Swiss Pro Lock Alloy hexagonal - Spoke Length (front): 650B Right/Left: 264mm/260mm - Spoke Length (rear): 650B Drive-Side/Non-Drive: 259mm/265mm - Front Hub: Roval AFD1, Center Lock, 12mm thru-axle end cap - Rear Hub: Roval AFD2, Center Lock, DT Swiss EXP internals, Shimano or SRAM XDR, 142x12mm thru-axle end cap - Assembly Method: Handbuilt - Extras: Roval padded wheelbag, Roval tubeless rim tape and valves (pre-installed)

Trail wheels often fall into two categories—they're either heavy and durable or light and flexy. And because of this, a lightweight, wide-profile, and enduro-ready carbon wheel seems like something only found in a fairytale, but lucky for you, we made it a reality. The Traverse SL Fattie 27.5 puts all the flickable, nimble features you need in an all-mountain wheel into one package, and it has the results to prove it. Along with light overall weight, stiffness, and durability, another top priority for the Traverse SL was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for both the front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. What's with the big-boned name, you ask? The Traverse SL Fatties may be wide, but with a 30mm inner rim width, they're far from the girth of a fat bike rim. But let's talk width. You've probably noticed that mountain bike rim widths have hovered between 19 and 23 millimeters for decades, and they've been long overdue for a change. In the search for a better wheel design, our engineers began testing 2.3- to 2.5-inch tires on 45-millimeter-wide fat bike rims to see what, if any, benefits could be found. It only took them a few rides to realize that the wider rims offered a variety of advantages, like adding additional tire volume, which better supports the tires in hard cornering, greatly improves traction because of the ability to run lower pressures, and noticeably increases rim stiffness. They did note that there is an occurrence of diminishing returns with increasing width, however, and after testing everything from 25 to 45mm, determined that a 30mm inner width is optimal. After determining the width, we began designing the rim using the knowledge that we gained when developing the Control SL. With this, we started with our Zero Bead Hook technology that gets rid of the weak spot found in a traditional wheel, and combined it with the wider profile to make a carbon rim that effectively dissipates forces. This way, you can take abuse from rocks without the worry of cracks or dents. Ok, so they're strong, impact-resistant, and tire supporting-they must be heavy, right? Wrong. Even though "fattie"? is in their name, they're far from fat. To achieve this weight, we hand-build our rims to our own alloy hubs, using only the highest quality DT Swiss Competition Race spokes. Inside our hubs, you'll find DT Swiss 240 internals with a quick engaging 54t DT Swiss star ratchet system in the rear that allows you to power over rocks and roots without delay. And while machines do a pretty good job of building wheels, we choose professionally trained humans because they do so with an artistic touch that makes for minimal flaws. Whether you need a carbon wheelset to get you through an enduro stage or one to shred your local rock garden, the Traverse SL Fattie has you covered. - Assembly Method: Hand-built - Bearing Type: Sealed cartridge - Every wheel includes tubeless valve stems in order to make tubeless set-up a touch easier. - Front Hub: Alloy body, 15mmx110 thru-axle, 19 and 31mm OD end cap options included. - Front Spoke Pattern: Two-cross - Nipple Type: DT Swiss Brass Pro Lock hexagonal - Rim Material: Carbon fiber - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook design. Black graphic under clear coat. - Rim Width: 30mm internal - Roval Engineered J-bend hubshells have a single spoke length for each wheelset. - Spoke Count: 28h Front - Spoke Type: DT Swiss Competition Race J-bend - Total Wheelset Weight: 1690g

XC, redefined. Equally ready on the start line or the trailhead, this wheelset meets the descending and climbing needs of modern XC, and then some. Where it thrives: In competition, challenging trails What it's built for: Precision, control, efficiency Highlights: - Carbon fiber construction, 25mm internal width, tubeless compatible - DT Swiss Aerolite spokes / DT Swiss 240 hub internals - 28h straight pull hubs / Weight: 1470g (pair)